CenterPunch Lighting Effects Server Owner's Manual
P/N: 400275000; Rev. F, 03/22
1
1
Components
The CenterPunch Lighting Effects Server is the interface used to control the lights from a Conqueror X/Pro
front desk terminal. It could have different configurations:
-
Effect Server X;
-
composed by 2 units: the 4DMX-HUB unit and a 5HD-CPU unit;
-
composed by 2 units: the 4DMX-HUB unit and a 4HD-CPU unit.
1.1
Effect Server X
The Effect Server X is the interface between each QAMF lighting system with the Conqueror X/Pro front desk
computer. The main functionalities of this unit is to permit the communication between the front desk PC
and the lights.
1.1.1
Installation notes
The Effect Server X communicates with the front desk via a standard network by the N1 connector, located
on the upper side of the unit.
WARNING
:
NEVER
connect, for any reason, a standard network device (such as a network switch) to a port
different than the N1 port. Connecting a standard network device to a port different than N1 may result in
major damages for the device or for the Effect Server X unit itself.
1.1.2
Label description
The image above displays the label located on the side of the 4DMX-HUB unit.
1.
Manufacturer (QubicaAMF Europe S.p.A.).
2.
Part number (P/N: 275002032).
3.
List of certifications (CE certification).
4.
Name of the unit (Effect Server X).
5.
Electrical notes (100-220 V; 3.8-1.9 A; 50/60 Hz).
6.
Serial number with bar code.
1.1.3
Connections
Power Specifications for the Effect Server X are: 100 - 220 V; 3.8 - 1.9 A; 50 - 60 Hz.
On the Effect Server X the following connections are available:
Connectors on the left side of the 4DMX-HUB unit
:
•
D1 DMX COM LINE
:
o
When EDGE String pinspotter equipped with a “SYSTEM CONTROLLER, ES”
P/N: 051-200-90X-YY is present
: connect here the “DMX 1 IN/OUT” port of the SYSTEM
CONTROLLER, ES unit installed on the first lane for the
DECK LIGHTING
.
