PiXtend eIO Hardware Manual
4.5. Accessories
The following accessories can be used with PiXtend eIO devices. The combination cable
set + RS485 USB dongle allows easy connection of two PiXtend eIO devices to a
computer system with USB port (see p. 64). This is particularly suitable for test setups in
the office and laboratory area.
4.5.1.Cable Set – without Termination
QS item number: 914
Count
Description
Value
#
1
Connection cable three-pole with D-SUB 9 socket
(can be used with all PiXtend eIO devices &
accessories article 132 - RS485 USB dongle)
2 m,
LiYY, 0.25 mm² (AWG23)
1
1
Connection cable three-pole
0.3 m,
LiYY, 0.25 mm² (AWG23)
2
Table 5: Scope of delivery: Cable set – without termination (article 914)
The cable set without termination / terminator is the right choice if the RS485 USB dongle
is not one of the bus ends.
www.pixtend.com
Copyright by Qube Solutions GmbH
29 / 119
Figure 10: Scope of delivery – Cable set – without termination (article 914)
1
2
