PiXtend eIO Hardware Manual
Isolation
no
Status display
no
Permitted cable length
< 3 m
< 30 m
unshielded cables
shielded cables
Table 24: Technical data – analog current inputs
The analog current inputs can measure DC and AC currents. When using alternating
currents, the input filters must be observed. Only measurements in the positive range are
possible. Although negative currents can be created, they can not be evaluated.
Warning!
Voltages greater than +/- 30 V DC can lead to component failure.
** Under EMC exposure deviations of up to 2% (based on the final scale value) are
possible.
www.pixtend.com
Copyright by Qube Solutions GmbH
108 / 119
