3
rd
Generation Rack-
Mount RDMS™
157
Quasonix, Inc.
4.5.3.10.1 Signal Strength Display
The Signal Strength display has two modes depending on the option selected in the RSSI Display drop down menu,
shown in Figure 268.
If “Absolute” was the
RSSI Display selection for the channel, the actual signal strength is displayed.
If “Relative” was selected, the
signal strength displayed is relative to AGC Zero. The following bullets apply to
RSSI Relative:
•
A value of zero indicates no input signal
•
A value above zero indicates how strong the signal is above no input
•
“*** dBm” displayed (
Figure 202) indicates AGC is not zeroed and the value is invalid
•
A s
mall “r” displayed next to the
Signal Strength (S) label indicates AGC Zero Relative was selected
Figure 271: Signal Graph and Signal Indicators
Windows, Zero AGC RSSI Display “Relative”
4.5.3.11 Reset to Factory Defaults Button
The Reset to Factory Defaults button, shown in Figure 272, sends a command to reset the RDMS hardware to
factory default settings. During the process, the Browser Interface is temporarily unavailable.
