Rack-Mount RDMS
TM
Telemetry Receiver
51
Quasonix, Inc.
Figure 90: Network Menu, Apply New Settings Displayed
4.1.5.8.1 DHCP
The DHCP option, when enabled, allows for the rack unit to automatically receive an IP address from the local
DHCP server. If DHCP is turned off, then the user must choose a valid IP address for the unit.
Figure 91: Network Menu, DHCP Setting
4.1.5.8.2 IP Address
The IP address for the rack unit will either be assigned to it automatically through the use of DHCP, or it must be
entered by the user. When choosing an IP address, it is critical that the address is unique; otherwise the unit will not
operate within the network properly. It is strongly recommended that the user contact their network administrator to
receive a reserved address for this purpose.