Rack-Mount RDMS
TM
Telemetry Receiver
34
Quasonix, Inc.
Figure 48: AGC Menu, AGC Zero Hold Off Highlighted
To change the Gain or Time Constant values, select Gain or Time Constant, then press the Enter key on the front
panel.
Figure 49: AGC Menu, Gain and Time Constant Highlighted
A dialog screen displays prompting the operator to enter a new AGC Gain or Time Constant using the rack’s front
panel numeric keypad. When the new value is entered, press the Enter key on the keypad.
Figure 50: AGC Gain and Time Constant Entry Screens
AGC Zero Hold causes the receiver to hold its zero setting, even if other parameters are changed. With AGC Zero
Hold OFF, the receiver resets the AGC Zero value for any change of Mode, Bit Rate, or Frequency.