Rack-Mount RDMS
TM
Telemetry Receiver
25
Quasonix, Inc.
Figure 26: Main Menu, Bit Rate Setting
Either method displays a bit rate dialog screen prompting the operator to enter a bit rate using the rack’s front panel
numeric keypad, in Mbps. A decimal point is only needed for bit rates with fidelity down into the kilobits per second
range.
Figure 27: Bit Rate Entry Screen
For example, to set the bit rate to 10 Mbps, press the following key combination:
Figure 28: Example Keypad Combination for Setting Bit Rate
If an out-of-range bit rate is entered, the maximum or minimum possible rate will be set by default. For instance, if
the user attempts to set the bit rate to 50 Mbps in SOQPSK-TG mode, the receiver will default back to 46 Mbps, the
highest possible rate in that particular mode.
4.1.4.4
Diversity Combiner (Optional)
A pre-detection diversity combiner is available as an option for dual-channel receivers.
If diversity combining is installed on the RDMS™, it can be enabled through the Main Menu > Combiner option.