Quasar CB-6204/CB-6208 User and Installation Guide
22
7.
Right-click the camera whose network property is to be changed. From the context menu
that opens, select
Assign IP
. The
Assign IP
dialog is displayed.
Figure 21: DNA Assign IP – Use DHCP Dialog Box
Tip:
Record the camera’s MAC address for future reference.
8.
To access DNA, do one of the following:
a.
For DHCP (not supported by Latitude):
i.
Select
Use DHCP
. Do not use for Latitude.
ii.
Click
Update
and wait for status.
b.
For Static IP (recommended for Latitude users):
Figure 22: DNA Assign IP – Static IP Dialog Box
i.
Do not select the
Use DHCP
checkbox. This is recommended for security
purposes and for and Latitude users. In the IP Address, Gateway, and Netmask,
enter the respective LAN/VLAN (optional DNS) values.
ii.
Click
Update
and wait for
OK
status to be displayed.
9.
Right-click and select
Web
to directly access the camera via a web browser. The default web
browser opens and requests access to the camera IP address.
