QK-R041 Manual
V 1.0
9 of 16
2022
Figure 4 The antenna connections
4. Indication LEDs
The R041 features indicator LEDs which show power, system, WiFi and 4G/3G network strength status.
There is also another LED on the front panel, which can be customized as required by the operator.
* Power: LED light is constantly lit in red when the device is powered on.
* System: LED light flashes once every second, when the router is working properly.
* WiFi: LED will flash for each data transaction via WiFi. It will keep steady on when idle.
* Reserved: This LED can be assigned to a specific status or event by using the configuration interface.
* 4G/3G signal strength: There are four LED lights: the left LED shows the
current network type. Red indicates 2G, green indicates 3G(UMTS) and the
orange (mixed green and red) indicates 4G(LTE).
The other three LEDs represent the current signal strength. More lit up LEDs mean stronger signal.
5. Configuration
After you completed the installation as described in the section above, you can log in and start
configuring your router.
1. Connect your tablet, iPad, Mac or desktop to the
router’s WiFi network using the default password,
which is ‘QE88888888’.
