Quantum ValueLoader DLT VS160, User Manual

Page: 24 / 88

Chapter 1 Installing the ValueLoader
Installing the ValueLoader into a Rack
10 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
Figure 5 Installing
Mounting Brackets
(Left Side Shown)
3 Using the screws and clip nuts from the rackmount hardware
package, secure one rail to each side of the rack in the location in
which you plan to install the ValueLoader.
• Be sure to secure both the front and back of each rail to the rack.
The rails extend to fit a variety of rack depths.
• The correct orientation of the left rail is shown in figure 6 . Repeat
for the right rail.