Quantum ValueLoader DLT VS160, User Manual

Page: 20 / 88

Chapter 1 Installing the ValueLoader
Choosing a Location
6 ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
Choosing a Location
1
Choose a location that meets the following criteria (see appendix A on
page 61 for more specifications):
Table 1 Location
Criteria
Requirement Description
Standalone
requirements
Select a location that is flat, sturdy, level, and
close to a host server. Do not place the
ValueLoader on the floor or other carpeted
surface.
Caution:
Do not place the ValueLoader on its
side or upside down or stack items
that weigh more than 15 kg (33 lbs)
on top of the ValueLoader.
Rack requirements Standard 19-inch rack with 2U of clearance.
Room temperature 10-35° C (50-95° F)
Power source AC power voltage: 100-127 VAC; 200-240 VAC
Line frequency: 50-60 Hz
Note:
Locate the AC outlet near the
ValueLoader. The AC power cable is
the product’s main AC disconnect
device and must be easily accessible at
all times.
Weight 10 kg (22 lbs)
Air quality Minimal sources of particulate contamination.
Avoid areas near frequently used doors and
walkways, stacks of supplies that collect dust,
printers, or smoke-filled rooms.
Caution:
Excessive dust and debris can
damage tapes and tape drives.