Quantum Sun StorEdge L25, User Manual

Page: 78 / 192

Chapter 3 Changing the Library Configuration
Changing the Serialization Setting
62 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Changing the Serialization Setting
3
The
Serialization
option controls how the library returns the tape
drive serial number when a
Read Element Status
is requested.
When
Serialization
is set to
On
, the tape drive serial number is
returned in a format compatible with Quantum ATL Prism
products. When
Serialization
is set to
Off
, the tape drive serial
number is returned in a vendor unique format. This setting is only
valid when
Emulation
is set to
ATL M2500
or
ATL 1500
(see
Changing the Emulation Setting on page 59).
To enable or disable drive serialization:
1
Access the
Configuration
screen (see Accessing the
Configuration Screen on page 53).
2
Press the
Up
or
Down
buttons until
Serialization
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Serialization
setting. The available settings are
Enabled
and
Disabled
.
5
Press
Select
.
To return to the
Configuration
screen without changing the
option setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Note:
The default setting is
Disabled
.
Caution:
If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.