Quantum Sun StorEdge L100, User Manual

Page: 90 / 192

Chapter 3 Changing the Library Configuration
Changing the Auto-Import Option
74 Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library User’s Guide
Changing the Auto-Import Option
3
The
Auto-Import
option controls how cartridges are moved from
the import/export slots of the mailbox to the magazine slots:
• Enabling this option causes the library to move any cartridges
in the import/export slots to the first (lowest element address)
free magazine slots automatically. The move is performed
automatically (without need for host commands) at both
power-up and whenever the import/export magazine is
inserted.
• Disabling this option removes the above capability; the host
software must issue SCSI commands to move cartridges from
the import/export slots to the required magazine slots.
To change the
Auto-Import
setting:
1
Access the
Configuration
screen (see Accessing the
Configuration Screen on page 53).
2
Press the
Up
or
Down
buttons until
Auto-Import
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Auto-Import
setting. The available settings are
Enabled
or
Disabled
.
Note:
The default setting is
Disabled
.