Controller LEDs on the E2600 controller-drive tray
98 01 6-0 5
1
2
3
4 5
1.
Host Link 1 Service Action Required LED (Amber)
2.
Host Link 2 Service Action Required LED (Amber)
3.
Battery Service Action Required LED
4.
Controller Service Action Allowed LED (Amber)
5.
Controller Service Action Required LED (Amber)
Controller LEDs and seven segment display on the E2700 controller-drive trays
1.
Controller Service Action Allowed LED (Blue)
2.
Controller Service Action Required LED (Amber)
3.
Seven-Segment Display
8. Perform these steps if any of the controller-drive tray’s Service Action Required LEDs are
on, or
if the Controller Service Action Required LED is
on:
a. Check that the controller canister has been installed correctly and that all of the cables are
correctly seated. Reinstall the controller canister, if necessary.
b. Check the controller-drive tray’s Service Action Required LEDs and the Controller Service
Action Required LED again. If the problem is not corrected, contact technical support.
9. For a duplex configuration, repeat step
7
on page 22 through step
8
on page 24 for controller B.
24 |
