Quantum SPARK 1535, Getting Started Manual, Page: 37 / 70

Wireless Network
Quantum Spark 1535 / 1555 Appliance Getting Started Guide | 37
Wireless Network
For WiFi models only:
In the Wireless Network page, configure wireless connectivity details.
When you configure a wireless network, you must define a network name (SSID). The SSID
(service set identifier) is a unique string that identifies a WLAN network to clients that try to
open a wireless connection with it.
We recommend that you protect the wireless network with a password. Otherwise, a wireless
client can connect to the network without authentication.
To configure the wireless network now:
1. Select Configure wireless network now.
2. Enter a name in the Network name (SSID) field. This is the name shown to clients that
look for access points in the transmission area.
3. Select Protected network (recommended) if the wireless network is protected by
password.
4. Enter a Password.
5. The Hide password option is selected by default.
6. Allow access from this network to the local network is selected by default. This means
the wireless network is considered trusted and access is allowed from it to the local
network.
7. Radio Band
n 2.4GHz: 2.412~2.472GHz
n 5GHz: 5.150~5.850GHz / 4.920~5.850GHz