Quantum Scalar i6000, User Manual

Page: 477 / 738

Chapter 13: Running Your Library
Understanding Location Coordinates
Quantum Scalar i6000 User’s Guide 459
Figure 49 Status Buttons -
Drives and Robotics Issues
You can click system status buttons to display additional information
about the subsystems. The information that appears depends on the
status shown on the button:
•
Good
— Either a message appears informing you that no tickets
exist for the subsystem or a list of subsystem tickets appears that
are in Closed or Verified states.
•
Warning, Degraded, or Failed
— A list of open tickets for the
subsystem appears.
Tickets provide information about issues that the library has detected.
For more information, see Using System Status Buttons to Display Ticket
Lists on page 53.
Understanding Location Coordinates
This section describes the coordinate addressing system that the library
uses to indicate the location of cartridges, drives, and I/O blades in the
library.
You can use the
Library Explorer feature to view a graphical
presentation of all the drives, cartridges, and slots in the library. The
Library Explorer can display all library elements according to physical
location in any configuration, from one module to eight modules, and
one drive up to the maximum number of 96 drives. For more
information on Library Explorer , see Using Library Explorer on
page 553.
indicates Warning or Degraded status