Chapter 3: Configuring Your Library
Working With Partitions
Quantum Scalar i6000 User’s Guide
153
Drives of the specified type within the partition appear in the
table.
Note:
All drives of the specified type within the partition are
listed, regardless of whether they are attached to an FC
I/O blade or Ethernet Expansion blade.
If you need to download a new drive firmware image to use
with drives that you want to participate in auto leveling
operations, perform the procedure under
on page 592, and then proceed with the next substep.
Otherwise, proceed directly to the next substep.
After you download a new image, the new drive firmware
version is automatically added to the
Firmware Version
drop-
down list.
b
In the left-most column of the table in the
Selected Drives will
be Autoleveled
area, select one or more check boxes that
correspond to drives that you want to update with the same
drive firmware version, and then click the version in the
Firmware Version
drop-down list.
Note:
Only drives that are attached to an FC I/O blade or an
Ethernet Expansion blade can participate in drive
firmware autoleveling operations.
19
To continue, click
Next
. The
Partitions - Summary Information
dialog box appears.
20
Verify that the parameters you set are correct.
21
If the summary information is correct, click
Modify
. The
Partitions -
Completed
dialog box appears.
Note:
After you click
Modify
, the
Cancel
button becomes
unavailable.
22
Review the information to make sure it is correct.
23
If you want to view the drive information after modifying the
partition, click
Next
.
24
Click
Finish
. The
Partitions
dialog box appears again.
25
Click
Close
.
Summary of Contents for Scalar i6000
