background image

Chapter 3  Quantum Scalar 50 Remote Management

Operations

Quantum Scalar 50 User’s Guide

79

Find Barcode

3

The find barcode section allows the user to find a specific barcode (or 

partial barcode) within the library and view its location.
To find a barcode or partial barcode:

1

Enter a barcode, or partial barcode with wildcards (*,?) in the barcode 

field. 

2

Click 

Find

.

A separate window displays the barcode(s) sharing the barcode 

string entered in the barcode field. Click the individual barcode label 

to display the corresponding cartridge detail page. 

Find Media ID

3

The show contents section allows the user to locate a specific media ID 

within the library (slots, ports, drives, hand, or address)
To find a media ID:

1

Enter a media ID, or partial ID with wildcards (*, ?) in the Media ID 

field. 

2

Click 

Find

.

A separate window displays the media ID(s) sharing the string 

entered in the media ID field. Click the individual barcode label to 

display the corresponding cartridge detail page. 

Note:

Leaving the barcode field empty will result in listing all 

barcode labels within the library.

Note:

Leaving the media ID field empty will result in listing all 
barcode labels within the library.

Summary of Contents for Scalar 50



































































































































































































































































































Reviews: