RDX® Internal SATA
1
2
3
4
5
SATA Cable
Power Adapter Cable
Mounting Screws
Quick Start Guide
1.
2.
4.
3.
for SATA
WHAT‘S IN THE BOX?
The following power ratings represent typical-use performance
DC Input Voltage and
Rated Input Current
SATA III
5V/1.6A and 12V/0.003A
Power Source
Power Ratings
NOTE
: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Compliance Notice
for SATA
RDX Emergency Media Eject Pin
5.
SATA I
5V/1.5A
