Q5VOIP SERIES MANUAL
file:///C|/PACH-CO.COM-2022-B/online_manual/q5voip_manual.htm[4/27/2022 8:54:09 AM]
Function Code 02: Edit Existing Directory
Function Code 03: Delete Tenant Directory
Function Code 04: Clear All Tenant Directories
Function Code 05: Enable or disable Call
Function Code 06: Add New Access Code
Function Code 07: Delete Access Code
Function Code 08: Clear All Access Codes
Function Code 09: Access Code Digit
Function Code 10: Add Card
Function Code 11: Delete Card
Function Code 12: Clear All Cards
Function Code 13: Set Time
Function Code 14: Set Date
Function Code 15: Initializing Event Recording
Function Code 16: Auto Unlock Schedule (AUS)
Function Code 17: Time Zone (TMZ)
Function Code 18: Holiday Zone (HLD)
Function Code 19: Directory Digit
Function Code 20: AUXIN1
Function Code 21: AUXIN2
Function Code 22: Do Not Disturb
Function Code 43: Do Not Disturb Zone
Function Code 44: Disable Time Zone Relay
Function Code 45: Relay 1 and 2 Unlock Timer
Function Code 46: Firmware Version
Function Code 48: PBX Enable
Function Code 49: Edit Existing Access Code,
Temporary Code and Special Code
Function 50: Erase Memory to Factory Default
Function Code 51: Welcome Screen
Call from the System
Opening Door Remotely
Opening Door Using Access Code, Temporary Code
and Special Code
Opening Door Using Card, Temporary Card, and
Special Card
Extending Talk Time
Call the System from Remote Location
LIMITATIONS OF LIABILITY
This manual is subject to change without notice.
Pach and Company is not liable for any errors that might occur from use of this document, nor is any commitment to
update the information herein implied.
Pach and Company does not assume any liability for any damages, which may arise in installation or use of the Quantum
Q5VOIP Series Pach and Company does not assume liability for any incompatibility between the Quantum Q5VOIP
Series and users devices.
Pach & Company reserves the right to make changes without prior notice to any products in order to improve reliability,
function or design.
PRODUCTS LIMITED WARRANTY
If your product does not work properly because of a defect in materials or workmanship, Pach and Company (referred to
as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original
purchase (Limited Warranty Period), at its option either (a) repair your product with new or refurbished parts or (b)
advance replacement with new or refurbished product. The decision to repair or advance replacement will be made by the
warrantor. Advance replacement will be ship UPS ground under the warranty period with no charge.
The defective product
must be return to Pach and Company within 15 days after receiving the advanced replacement otherwise you will be
billed the full amount.
