Chapter 2 Basic Library Operations
Inserting Tape Cartridges
Quantum PX720 User’s Guide
41
Taking ESD Precautions
2
Components within the PX720 contain static-sensitive parts. To prevent
damage to these parts while performing installation, maintenance, or
replacement procedures, observe the following precautions:
• Keep the cabinet turned off during all installation, maintenance, and
replacement procedures.
• Keep the cabinet power cord connected to a grounded power outlet
except when working with AC electrical components.
• Use an antistatic wrist strap when touching internal cabinet
components. To use the wrist strap properly, place the band around
your wrist and attach the clip to the cabinet frame. Keep the strap on
until you are ready to close the cabinet doors.
• Keep static-sensitive parts in their shipping containers until ready for
installation.
• Do not place static-sensitive parts on any metal surface. If you need to
put down a static-sensitive part, place it inside its protective shipping
bag or on a grounded antistatic mat.
• Avoid direct contact with static-sensitive parts. Avoid touching
connectors and discrete components.
• Close cabinet door and access panel when not working on the
cabinet.
Caution:
Handle tape cartridges with care. Do not drop or bang
them, or place them near sources of electromagnetic
interference. Rough handling can displace the tape
leader, making the cartridge unusable and potentially
hazardous to the tape drives.
Warning:
Avoid contact with the power supplies, EMI filter,
and all other AC electrical components while the
cabinet is connected to a power outlet.
