Quantum PX500 Series User Manual Download Page 44

Page: 44 / 294

Chapter 1 Library Description

Library Features

Quantum PX500 Series User’s Guide

Table 6 Front Panel Features

Feature

Description

Operator

control panel

(OCP)

The operator control panel consists of the following elements:

• OCP display

The OCP displays library status information and allows

you to access the library menus. These menus allow you to

view or change the library settings and run diagnostic

tests.
The OCP is discussed in detail in

chapter 2

• Five OCP

buttons

These buttons in combination with the OCP are used to

scroll through screens and select options or commands.

The functionality of these buttons changes depending on

the currently displayed OCP screen. The power button is

used to turn the library on and off.

• Light emitting

diode (LED)

indicator

The operator control panel has one LED indicators:
• Steady green - indicates a idle state
• Flashing green - indicates a busy state
• Flashing amber - indicates an attention state
• Steady amber - indicates an error

Magazine

access doors

These doors protect the data cartridge magazines.

Summary of Contents for PX500 Series







































































































































































































































































































Search results

Summary of Contents for PX500 Series

Reviews:

Related manuals for PX500 Series

Brands by name

Popular brands

Quantum PX500 Series, User Manual

Search results

Summary of Contents for PX500 Series

Reviews:

Related manuals for PX500 Series

Brands by name

Popular brands