Appendix C Installing the PX502 Library
Installing the Library
Quantum PX500 Series User’s Guide
225
2
Use the up and down arrows to view or edit the date and time
information. Press
Enter
to accept the new settings.
3
When you are finished viewing/editing the date and time
information, press
Exit
to return to the
Setup
screen.
Setting Network Information
3
To view or edit the network information:
1
From the
Setup
screen, use the up and down arrows to highlight
Network
and press
Enter
.
2
The
Network
):
Figure 122 Network Screen
The
Network
screen allows you to view or edit the following network
settings:
• DHCP (default setting)
• IP address
• Subnet mask
• Default gateway
3
Use the up and down arrows to select the network setting you wish
to view or edit and press
Enter
.
When you are finished viewing/editing the network information,
press
Exit
to return to the
Setup
screen.
Note:
The network settings (IP address, subnet mask, and
default gateway) are only active when DHCP is disabled.
