Chapter 3 Quantum PX500 Series Remote Management
Operations
Quantum PX500 Series User’s Guide
103
To move a cartridge:
1
Select a cabinet, source element (slot, drive, address, or hand), and
enter a starting position and count. If the count field is left empty,
only the starting cartridge is moved.
2
Select a destination cabinet, element, and position. If more than one
cartridge is moved, the position entered in as a destination is the first
one filled, consecutive elements must be empty.
Inventory Page
3
The
Inventory
page allows the user to perform an inventory on all
elements within the library or specific element ranges.
To access the
Inventory
page, from the
Operations
page, click on the
Inventory
tab at the top of the page.
The
Inventory
page displays (see
):
Note:
The hand is the robotic gripper used to move
cartridges in the library. If the library is in a
stacked environment with other PX500 Series
libraries, the pass-thru slot is available as a source
element.
Note:
The library must be off-line to perform an inventory.
