Chapter 3 Quantum PX500 Series Remote Management
Status
Quantum PX500 Series User’s Guide
95
1
In the
Event Log
page, change the
From
and
To
areas to reflect the
time range of the event log you wish to view. Click the up and down
arrows to change the hour and/or minute values by increments of
one. Double-clicking will increment or decrement the value by 5. You
may also type in a valid hour (0 - 24) or minute (0 - 59).
2
Select desired categories and priority levels (critical, warning, or
informational) for the event list.
3
Click
View
to display the list.
A smaller window displays the information matching the range,
category, and priority specified.
Statistics Page
3
The
Statistics
page allows the user to view library statistics for the entire
library or certain components within the library.
The following table shows the statistics available from the
Statistics
page:
Note:
The default date/time range is one hour prior to the
current time and day.
Note:
Search time will vary depending on the time range
entered.
