![background image](http://html1.mh-extra.com/html/quantum/p7000-series/p7000-series_unpacking-instructions-manual_3855995006.webp)
Quantum ATL P7000 Unpacking Instructions
Document 6434006-02, Ver. 2, Rel. 0
August 2002
6
Preparing for the Installation
Environmental
Conditions
0
The installation site must have the following environmental
conditions:
• Humidity: 20%-80% non-condensing
• Temperature: 15°C-32°C (59°F-90°F)
• Altitude: sea level to 10,000 feet
These environmental conditions apply when the library is in
operation.
Preparing for the Installation
0
Before you begin the installation procedure in this section, make the
following preparations as described in this section:
• Providing necessary tools and equipment for installation
• Taking ESD precautions
Providing Necessary
Tools and Equipment
0
Provide the following tools for unpacking the library:
• Scissors
• Ratchet with 15/16 inch socket (or 15/16 inch open-end wrench)
Provide the following tools for removing the shipping restraints:
• #2 Phillips® screwdriver
• Tie wrap
Provide the following tools for leveling the library:
• 3/4-inch open-end wrench
• Carpenter’s level
Taking ESD
Precautions
0
Some components within the ATL P7000 contain static-sensitive parts.
To avoid damaging these parts while performing installation
procedures, always observe the following precautions:
• Keep the library turned off during all installation procedures.
Note:
For additional library specifications (including
environmental requirements during shipping and storage),
see appendix A in the
Quantum ATL
P4000
and ATL
P7000
Tape Libraries User’s Guide
.