Chapter 3 Operator Commands
Configuring the Library
Quantum P4000 and P7000 Libraries User’s Guide
65
Figure 37 Configure:
Library Settings
Screen
3
Press the
Select
button until you highlight the setting you want to
change.
4
Using the arrow buttons, scroll through available values for the
setting.
5
Press the
Change
button to accept the new value.
6
Repeat steps 3 through 5 to make other changes.
7
Press the
Back
button to return to the
Configure: Library
screen.
The options you selected are now part of the library configuration.
SCSI ID
Assignment
Guidelines
3
When selecting SCSI ID numbers, each SCSI device on the same bus must
have a unique number from 0 to 15. SCSI devices include the library
robotics, the host computer, the library tape drives, internal and external
hard disk drives, and so on.
Overview
Tapes
Operator
Back
Forward
Home
O
Configure: Library Settings
Change
Select
System
Off-line
Standby
Load Port
Stop
Model:
64xxxxx
# Bins:
679
# Drives:
8
Device:
Library
SCSI ID:
0
About
