Appendix B Relocating the Library
Crating the Library
112
Quantum P4000 and P7000 Libraries User’s Guide
Disconnecting
Library Cables
2
To disconnect library cables:
1
Disconnect SCSI cables and terminators, Fibre Channel, and Ethernet
cables.
2
Disconnect the power cord from the outlet and the power
distribution assembly of the library.
3
Pack all cables with other library accessories.
Crating the Library
2
Use this section:
• If you need to ship the library to the new site.
• If you need to transport the library by forklift or similar means.
If you are moving the library within a facility, refer to
Crating the
Library
2
To crate the library for a new site:
1
Prepare the shipping pallet for the library as shown in
figure 59
.
a
Attach the two ramp extensions to the pallet.
b
Place the wooden support bar underneath the ramp extensions.
c
Verify that the left wooden bar is attached to the pallet.
2
Place the library on the pallet
a
Raise the library support feet.
Warning:
The library weighs approximately 1444 pounds (655 kg).
Use at least two people to perform any steps that involve
lifting or guiding the library. Use safe practices when
lifting or guiding the library and handling the ramp.
