Chapter 5 Multi-Unit Commands
Configure Multi-Units (P4000/P7000)
88
Quantum P4000 and P7000 Libraries User’s Guide
Figure 51 Configure
Multi-Unit
2
Press the
Select
button to access the option to configure.
3
Using the arrow buttons, scroll through the available values for the
selected option.
4
When the desired value is displayed, press the
Select
button to
advance to the next option.
5
When you have finished making changes to the multi-unit
configuration options, press the
Change
button to save the options
and complete the configuration.
Caution:
Configuring the library to multi-unit operation
returns the number of tape drives to its default
number. Use the
Configure Library
screen to adjust the
number of tape drives if necessary.
Operator
Service
Multi
Unit
Back
Forward
Home
O
Configure: Multi-Unit
Change
Select
System
Off-line
Standby
Load Port
Stop
Library Unit:
MASTER
Library Unit #:
# of Libraries:
LUN Config:
SINGLE LUN
0
3
About
