![background image](http://html2.mh-extra.com/html/quantum/p4000-series/p4000-series_user-manual-addendum_3554219003.webp)
Quantum ATL P4000 and ATL P7000 Prism FC470 User’s Guide Addendum
Document 6331190-01, Ver. 1, Rel. 1
July 2003
Introduction
3
Introduction
0
The Quantum ATL P4000/P7000 Series automated tape libraries are
controlled by a host computer via a SCSI differential bus using the
SCSI-2 medium changer command set. There is also an RS-232
diagnostic port interface.
The P4000/P7000 Prism Architecture™ allows for easy conversion
from the SCSI host interface to a Fibre Channel host interface. This
document describes upgrading a standard P4000/P7000 equipped
with a SCSI host interface to a Fibre Channel host interface using a
Prism FC470 Upgrade kit.
Fibre Channel
Description
0
Fibre Channel is a serial data transfer architecture for use with
computers and mass storage devices that is rapidly emerging to
challenge SCSI as the interface of choice for host-to-storage
applications.
Fibre Channel advantages include:
• Connection distances with the Quantum ATL FC470 option up to
500 meters
• 2 GB/Sec data transfer rates
• Supports up to 126 devices in a loop mode
• Supports 24-bit addressing for over 16 million devices in point-to-
point mode or fabric, when using a Fibre Channel switch or
multiple Fibre Channel switches.
• Operating system independence
• Interconnect flexibility
Prism FC470 Router
Operation
0
Once a Prism FC470 Router option is installed and tested, the library
operates exactly as a P4000/P7000 with a SCSI host interface.
Operation of the library via the graphical user interface (GUI) is
unchanged.
Supported Fibre
Channel Host Bus
Adapters and Switches
0
The following tables provide a list of supported Fibre Channel host
bus adapters (HBAs) and switches that have been tested at the time of
this printing. For an updated list of supported Fibre Channel HBAs
and switches, please see
www.quantum.com
.