Quantum P3000 Series, User Manual

Page: 78 / 146

Chapter 4 Service Commands
Generating Reports
58 Quantum|ATL P3000 Series User’s Guide
Asterisks representing the password appear in the Reenter text
box.
If You Lose a
Password
4
If you lose the Operator, Import Only, or User password, you can
replace it by:
• Opening the Service screen and following the steps to change
the password (see page 64 )
• Pressing the Reset Passwords button on the Change Password
screen. This resets all passwords to their default values.
The default values are:
• Service “5678”
• Operator “1234”
• User “2222”
• Import Only “1111”
If you lose the Service password (and cannot access the Change
Password screen), contact the ATL Customer Support Department
for assistance (see the preface for contact information).
Generating Reports
4
The Service screen enables you to generate on-screen reports about
the following:
• Library operation statistics
• Actuator positions and status
• System test results
• Auto Clean status and tracking information