Quantum P3000 Series, User Manual

Page: 107 / 146

Appendix B Relocating the Library
Preparing the Library for Relocation
Quantum|ATL P3000 Series User’s Guide 87
• Disconnecting library cables
Removing Tape
Cartridges
2
To remove tape cartridges:
1
Unload all tape cartridges from the tape drives.
2
Stop all library operation.
a
Press the Standby button on the GUI. This places the library
off-line after the completion of any currently executing
operations. When the library is off-line, the GUI system
state display indicates “System Off-line.”
b
Press the Stop button to remove power from library
robotics.
3
Unlock and open both library doors.
4
Turn off the library.
5
Remove all tape cartridges from the library bins and tape
drives.
6
Carefully pack all tapes for shipment.
Installing Shipping
Restraints and
Packing
2
To install internal shipping restraints:
1
Remove the extension axis restraints from their storage
location in the chassis (see figure 42 ).
Caution:
Always prepare the library for relocation before any
move.