Quantum MC300 Prism, User Manual, Page: 42 / 140

Chapter 3 ALERT SNMP
SNMP Community Management
26 MC300 Prism Management Card User’s Guide
Figure 10 Edit
Community
3
Under
Add Community
, enter the new community information:
• Enter a unique name in the
Community Name
field. The
field holds up to 20 characters (a-z, A-Z). No special
characters or blank spaces are allowed
.
• Enter an IP address in the
IP Address
field. If the value in
the Subnet Mask field ends in a zero, the value in the IP
address edit box must also end in a zero.
• Enter a subnet mask in the
Subnet Mask
field
.
Caution:
If no communities are defined, the PMC is
universally accessible through a “public”
community (read-only).
Note:
A single community with an IP address or subnet
mask set to
0.0.0.0,
or left blank, indicates that
IP-address-based access control is disabled.