Quantum MC300 Prism, User Manual

Page: 117 / 140

Appendix A Event Details Listing
MC300 Prism Management Card User’s Guide 101
Table 18 Failure
Events Detail
FSC
Code
E-mail Message
Error Type
Description
0001 Hardware Failure A divide by zero exception has occurred
0002 Hardware Failure A parity error has been detected on the address/data bus
0003 Hardware Failure Out of memory
0004 Soft Error _flsbuf was called
0005 Soft Error _getbuf was called
0006 Hardware Failure Stack was exhausted
0007 Hardware Failure Floating point trap
0008 Hardware Failure Free( ) called on bad memory block
0009 Hardware Failure Realloc( ) found corrupted memory block
0010 Hardware Failure Free( ) found corrupted memory block trailer
0011 Hardware Failure Realloc( ) found corrupted memory block trailer
0012 Hardware Failure NVR capacity exceeded
0013 Hardware Failure Heap consistency check found corruption
0014 Hardware Failure Heap consistency check found corruption
0015 Hardware Failure Watchdog has interrupted processor
0016 Hardware Failure Size passed to malloc too large
0017 Hardware Failure Size passed to calloc too large
0018 Hardware Failure Size passed to realloc too large
0019 Hardware Failure Breakpoint instruction executed
001A Hardware Failure Debug exception occurred