Chapter 3: F2000 Basic Operations
Power On a Canister
Quantum F2000 User’s Guide
43
7
Do one of the following:
• If you need to power off just one canister, the process is
complete.
• If you need to power off the entire system, then you must
power off the second canister and disconnect the power cables
from the PSUs:
a
Disconnect the Ethernet cable from the IPMI/BMC port on
the canister and plug it into the IPMI/BMC port on the other
canister.
b
Repeat
on page 39 through
to power off the
second canister.
c
Disconnect the power cables from the PSUs to completely
remove power from the system.
Power On a Canister
To power on a canister:
1
Access the BMC Web UI for the canister you need to power on.
Note:
Refer to
on page 30 for detailed
instructions on how to access and log into the BMC Web
UI.
2
From the BMC Web UI Dashboard, click
Power Control
from the left
menu.
The
Power Control
page appears (see
on page 40). The
page should indicate that the “Host is currently off”.
