Chapter 4: F2000 Customer Replaceable Units (CRUs)
SSD Assembly Replacement
Quantum F2000 User’s Guide
175
Remove an SSD
Assembly
To remove an SSD assembly:
1
Log in to the Appliance Controller Console as the
sysadmin
user:
a
Open an SSH connection to the Appliance Controller using the
sysadmin
user account.
b
At the
password
prompt, enter the
sysadmin
user's password
(the default is
sysadmin
). Example SSH connection to the host
server:
Note:
For additional options on how to log in to the Appliance
Controller Console, refer to
Access the Appliance Controller
in the
Appliance Controller Documentation Center
(
http://www.quantum.com/accdocs
).
2
In the Appliance Controller Console, enter the following command
to detach the degraded drive from the system:
The system identifies the degraded drive and detaches it. It returns
the following message if the drive detachment was successful:
login as: sysadmin
sysadmin@quantum's password:
Last login: Fri Dec 7 13:37:11 2018 from
eng.example.com
Welcome to Quantum Xcellis Appliance Controller
Console
---------------------------------------------------
*** Type 'help' for a list of commands.
Xcellis:xcellis1>
# qstorage drive detach auto
All degraded drives were successfully removed
