Quantum DXi6902, Field Service Manual, Page: 100 / 242

Chapter 3: DXi6902 FRU Removal and Replacement Procedures
Opening and Closing the Node
76 Quantum DXi6902 User’s Guide
Figure 36 Removing the
DXi6902 Node from the Rack
6 Grasp the sides of the Node firmly and pull it forward until the rail
standoffs are at the front of the J-slots.
7 Lift the Node up and away from the rack and place it on a level
surface.
WARNING: The DXi6902 Node (including hard drives) weighs
53.0 pounds (24.0 kg). A minimum of two people are
required to lift the chassis.
8 Press and hold the power button on the front of the Node for three
seconds to fully drain the system of stored power prior to removing
the cover (see Figure 37 ).
Inner slide rails
Rear rail standoffs
Rear rail J-slots
Slide-release lock button
Lock lever