Quantum DXi6900 User Manual Download

Page: 92 / 400

Chapter 4: Configuration Wizards
OST Wizard

Quantum DXi6900 User’s Guide

The

About

page displays the status of the OST service. OST settings can be configured in

Ready

Stopped

, or

Verifying

state. The OST server is available for backup only in

Ready

state.

2. Click

Next

to continue.

Note:

At any time while using the wizard, you can click

Previous

to return to the previous step.

Figure 53:

OST Wizard: About

Step 2: Add Storage Servers

1. Under

Add Storage Server

, enter information about the storage server (see

Figure 54 on the next

page

Storage Server Information

Description

Name

Enter the name of the storage server.

Caution:

Do not use an underscore ( _ ) in the name of the

storage server.

Description

(Optional) Enter a brief description of the storage server.

Max Connections

Enter the maximum number of connections allowed to the storage
server (3 to 65536).

Note:

Quantum recommends setting

Max Connections

300.

Summary of Contents for DXi6900

















































































































































































































































































































































































































Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands

Quantum DXi6900, User Manual

Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands