Chapter 9: Configuration
System
Quantum DXi6900 User’s Guide
326
Additional Information
l
Passwords can be up to 32 characters. Alphanumeric characters and special characters are
allowed.
l
For accounts enabled with both SSH and password authentication, the DXi system will first
attempt SSH authentication . If there are no keys defined or no client key matches, the DXi
system will fall back to password authentication.
4. Click
Apply
.
Enabling GUI Service Account
Use the GUI password when logging onto the remote management console as a service account (see
Accessing Remote Management on page 65
).
To enable or disable the GUI service account:
1. Under
GUI Service
do one of the following steps:
l
Select the
Enable account
check box to enable the GUI service account.
l
Clear the
Enable account
check box to disable the GUI service account.
2. Enter the following information:
New Password
Enter the new password.
Confirm New Password
Enter the new password again to confirm it.
Additional Information
l
Passwords can be up to 32 characters. Alphanumeric characters and special characters are
allowed.
3. Click
Apply
.
Enabling SSH/CLI Service Account
The SSH service account provides SSH remote access to the DXi6900 system.
1. Under
SSH Service
, do one of the following steps:
l
Select the
Enable account
check box to enable SSH service account
l
Clear the
Enable account
check box to disable the SSH service account
2. The SSH service account may be configured with Secure Shell (SSH) key-based authentication.
Add an SSH Public Key