Chapter 9: Configuration
Notifications
Quantum DXi6900 User’s Guide
297
Figure 184:
Add Trap Destination Page
2. Enter information about the destination:
IP Address
Enter the IP address of the system that will receive the traps generated by the DXi6900.
Additional Information
l
When entering IP addresses, never use an address that is in a reserved IP address
range. To see a list of reserved IP address ranges, click the quick tip icon
[?]
located near the IP address field.
l
To use hostname format, you must specify at least one DNS IP address on the
Network
).
Name
Enter the name of the destination.
3. Select one or more traps to send to the destination:
Failure
Sends failure traps.
Warning
Sends warning traps.
Informational
Sends informational traps.
Available
Sends a trap when the system transitions from an unavailable to an available state.
Unavailable
Sends a trap when the system transitions from an available to an unavailable state.
4. Click
Apply
.
