Quantum DXi6900 User Manual Download Page 175

Page: 175 / 400

Chapter 7: Status
Hardware

Quantum DXi6900 User’s Guide

175

Figure 110:

Storage Arrays Page

The

Storage Arrays

section displays the following information about each storage array:

Component

The name of the storage array.

Click the name of the storage array to view detailed information for the array in the

Component

section.

Status

The status of the storage array.

Normal

- (Green) The component is operating correctly.

Attention

- (Yellow) There is a problem with the component.

Failed

- (Red) The component has failed.

The

Components

section displays the following information about the components in the selected storage

array:

Component

The name of the component.

Click the name of the component to view detailed information for the component in the
subcomponent section.

Count

The number of that component type in the system.

Summary of Contents for DXi6900

















































































































































































































































































































































































































Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands

Quantum DXi6900, User Manual

Search results

Summary of Contents for DXi6900

Reviews:

Related manuals for DXi6900

Brands by name

Popular brands