Quantum DXi4701, User Manual

Page: 89 / 440

Chapter 4: DXi4701 Configuration Wizards
NAS Wizard
Quantum DXi4701 User’s Guide 63
Figure 32 NAS Wizard: Share
Access
Step 5: Add Share
1 Under Add Share , enter information about the NAS share (see
Figure 33 ):
• Name - Enter the name of the NAS share.
• Description - (Optional) Enter a brief description of the share.
• Enable deduplication - Select the check box to enable data
deduplication. Quantum recommends that you enable data
deduplication to optimize disk usage.
Note:
Data deduplication is enabled by default. You cannot
enable or disable data deduplication after the share is
added.
•
Hide from network browsing
- (Windows shares only) Select
the check box to hide the share from network browsing. If
selected, you cannot see the share when browsing the network.
•
Export Protocol
- (Available only if you selected the
Both
option in Step 2: Protocol on page 59) Select the export
protocol for the share:
•
CIFS
- Select the CIFS option to use the share on a Windows
network.