Quantum DXi4701, User Manual

Page: 317 / 440

Chapter 9: DXi4701 Configuration
OST
Quantum DXi4701 User’s Guide 291
• Certificate File
• Private Key File
• Certificate Authority File
• Rejection List File
To install a file, click the Browse button to browse the system and
locate the file, and then click Open .
Caution: Installing certificate files requires a system reboot
immediately after the changes are applied. Wait for at
least 15 minutes before logging back in.
Note: You can install new certificate and key files at any time, as
long as there are no active network connections between
the OST media server and the DXi.
4 Click Apply .
Note: To clear all changes without saving them, click Reset . To
remove user installed certificate and key files, click Restore
Factory Defaults .
Note: To use DXi Accent, you must install the Quantum OST Client
Plug-in on the media server. For information about installing
the OST Plug-in and using DXi Accent, see the DXi-Series
NetBackup and Backup Exec OST Configuration Guide (6-
67079).
OST Client Plug-In
Use the
OST Client Plug-In
page to download the Quantum OST Plug-
in.
OST (OpenStorage) technology allows Symantec NetBackup and Backup
Exec to seamlessly integrate with the DXi4701. Using OST, NetBackup
and Backup Exec can manage backups through the DXi4701 and can
take advantage of the system's capabilities, such as data deduplication
and replication. To use OST, you must first download the OST Plug-in
and install it on the NetBackup or Backup Exec media server.