Quantum DXi4701, User Manual

Page: 301 / 440

Chapter 9: DXi4701 Configuration
OST
Quantum DXi4701 User’s Guide 275
Figure 149 Add Logical
Storage Unit Page
2 Enter information about the LSU.
• Storage Server - Select the storage server that will contain the
new LSU.
• Available Capacity - (Recommended for best performance)
Select this option to add an LSU that uses the available capacity
on the system.
You cannot add an available capacity LSU to a storage server
that already contains an LSU. Also, if you add an available
capacity LSU to a storage server, you cannot add additional LSUs
to that same storage server.
Note: After you add an LSU that uses the Available Capacity
option, you cannot change the LSU to use the Specific
Capacity option. Instead, you must delete the LSU,
then add a new LSU and choose the Specific Capacity
option (see Deleting an LSU on page 279).
• Specific Capacity - Select this option to specify the physical
capacity of the LSU, and then enter the following information.
• LSU Name - Enter the name of the LSU.
• Physical Capacity - Enter the physical capacity of the LSU (1
to 1048576 GB).