Quantum DXi4701 User Manual Download Page 290

Page: 290 / 440

Chapter 9: DXi4701 Configuration
OST

264

Quantum DXi4701 User’s Guide

Figure 144 Setting Up OST
Automatic Image Replication

Storage Servers

The

Storage Servers

page allows you to manage OST storage servers on

the DXi4701. You can view information about existing storage servers,

add or edit storage servers, and delete storage servers.
To access the

Storage Servers

page, on the

OST

page, click the

Storage

Servers

tab (see

Figure 145

Configure target DXi:

• Add allowed replication source.
• Create

local

OST user.

• Create storage server and LSU.

Configure source DXi:

• Specify replication target.
• Create

remote

OST user.

• Create storage server and LSU

with AIR enabled.

Create storage lifecycle policies

(SLPs) on the NetBackup server in

each domain to control when

duplication occurs and images are

imported.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands