Quantum DXi4701, User Manual

Page: 281 / 440

Chapter 9: DXi4701 Configuration
Replication Configuration
Quantum DXi4701 User’s Guide 255
Note: The Source IP Address field does not accept fully qualified
domain names. You must enter a valid IP address. Make
sure this IP address is configured in the allowable sources
list on the target DXi.
Note: When configuring segmented network interfaces, if the
source DXi replication, data, and management interfaces
are on the same subnet, you must add a host route on the
source DXi to make sure the replication interface is
correctly selected when replicating data to the target DXi
(see Understanding Interface Routing on page 315).
5 Click Apply .
6 Under Target DXis , select the target and click Resume to pause
replication.
Deleting a Replication
Target
Delete a replication target if the DXi4701 no longer needs to send
replicated data to that target. After the target system is deleted, the
DXi4701 will no longer send replicated data to that system.
When a target is deleted:
• All replication jobs to that target that are in progress or queued will
transition to failed.
• All replication job history for that combination of target and share
or partition is removed.
• All shares or partitions will be reconfigured to no longer replicate to
that target.
To delete a replication target:
1 Under Target DXis , select one or more targets to delete.
2 Click Pause to pause replication to the target.
3 Click Delete .
Note: The deleted target is not automatically removed from existing
replication schedules. You must edit scheduled events to
remove the deleted target (see Scheduler on page 292).