Quantum DXi4701, User Manual

Page: 249 / 440

Chapter 9: DXi4701 Configuration
VTL
Quantum DXi4701 User’s Guide 223
Partition List
The Partition List section displays the following information for all VTL
partitions on the DXi4701:
• Available Partitions - The number of partitions that have been
added to the system and the maximum number of partitions that
can be added.
• Available Virtual Tape Drives - The number of virtual tape drives
that have been added to the system and the maximum number of
drives that can be added.
• Name - The name of the partition.
• Mode - The current mode of the partition ( Online or Offline ).
• Model - The library model emulated by the partition.
• Drive Model - The tape drive model emulated by the virtual drives
in the partition.
• Drives - The number of virtual tape drives in the partition.
• Host Mapping - The current state of host mapping for the partition
( Yes or No ). If no hosts have been mapped, click Map to map hosts
to partitions (see Remote Host Mapping on page 240).
• Media - The number of virtual tape cartridges in the partition. If no
cartridges have been created, click Create to add media (see Media
Add on page 232).
• Slots - The number of storage slots in the partition.
• Deduplication - The data deduplication state of the partition
( Enabled or Disabled ).
• Replication - The current state of replication for the partition:
• Enabled - Replication is enabled.
• Send/Receive Sync ID - Cartridge Based Replication is enabled.
• Configure - Click to configure replication for the partition (see
Editing a VTL Partition on page 227)
• Scheduled - Replication is scheduled for the partition. Click to
view or modify the schedule (see Scheduling a Share or Partition
for Replication on page 297).
• Targets - The targets the partition is configured to replicate to.