Quantum DXi4701, User Manual

Page: 212 / 440

Chapter 7: DXi4701 Status
VTL Status
186 Quantum DXi4701 User’s Guide
Figure 103 Logical View Page
The Partitions section displays the following information about VTL
partitions:
• Partition - The name of the partition.
• Number of Drives - The number of virtual tape drives in the
partition.
• Capacity - The storage capacity of the partition.
• Used - The amount of space on all cartridges in the partition
currently used to store data. The value for Used might be less than
the original, native (raw) data size because the data is compressed
before it is written to the media.
• Used Percent - The amount of currently used space on all cartridges
in the partition expressed as a percentage of the total capacity
( [ Used / Capacity ] x 100 ).
Note: Click the Information button [i] next to a partition to display
detailed information about the partition.
Performance View
Use the
Performance View
page to view information about the
throughput of VTL partitions. You can also view performance for virtual
tape drives.