Quantum DXi4701, User Manual

Page: 150 / 440

Chapter 6: DXi4701 Replication
Replication Send
124 Quantum DXi4701 User’s Guide
• Manage replication targets (see Target DXis List on page 133)
Replication Jobs List
The Replication Jobs list displays replication statistics for all NAS shares
or VTL partitions on the DXi4701 that are eligible for replication. To be
eligible for replication, a share or partition must have data
deduplication enabled at the time it is created.
Note: For information about creating NAS shares or VTL partitions,
see Adding a NAS Share on page 207 or Adding a VTL Partition
on page 224.
The Replication Jobs list displays the following information:
Note: Click the arrow next to Shares or Partitions to display all
shares or partitions in the list. Alternately, click the plus [ + ] or
minus [ - ] icons to show or hide all shares or partitions.
• NAS/VTL - The name of the share or partition. Hold the cursor over
the name to display detailed information about the share or
partition.
Note: If multiple targets are configured for a share or partition,
click the arrow next to the share or partition to view all
targets.
•
Replication
- The replication state (
On
or
Off
). Click the toggle
switch to turn replication on or off for the share or partition.
Note: Clicking the toggle next to Shares will turn replication on
or off for all shares or partitions.
• Target - The hostname or IP address of the configured replication
target. If the share or partition is configured to replicate to multiple
targets, click the arrow next to the share or partition name to
display all targets.
• Sync ID - The Sync ID of the share or partition if Directory/File or
Cartridge Based Replication is enabled.
• Last Job Type - The type of the most recent replication job
( Replication or Synchronization ).