Chapter 2: Basic Operations
Locating DXi4700 Serial Numbers
Quantum DXi4700 User’s Guide
54
Turning Off the DXi4700
To turn off the system:
Caution:
Before shutting down the DXi4700, make sure that all backup and replication jobs are
finished, and that space reclamation activity is complete.
1. Shut down the system from the remote management console using the
Shutdown
option on the
Utilities > Reboot & Shutdown
page.
Note:
Shutting down the system can take up to 15 minutes. Only the Node will completely shut
down.
2. Turn off both power switches on the back of each Expansion module (JBOD).
Locating DXi4700 Serial Numbers
You will need the system serial number, the Node serial number, and the Expansion module serial number
at various times:
System Serial Number
You need this number to contact Quantum Support or to
add a licensed feature.
Node Serial Number
You need this number for a Node replacement component.
Expansion Module (JBOD) Serial Number
You need this number for an Expansion module
replacement component.
You can locate the system serial number on the
Home
page of the remote management console.
You can also locate the system serial number, the Node serial number, and the Expansion module serial
numbers by looking at the physical components.
l
The system serial number is located on the pull-out information tag on the front of the Node (see
). The text
Service Call System Serial Number
appears on the label. The system
serial number includes the letters
BVV
.
l
The Node serial number is located to the left of the SAS ports on the rear of the Node. It is the same as
the Node service tag.
l
The Expansion module (JBOD) serial number is located on rear right flange, next to the right power
supply.
Note:
The system serial number also appears on the location ID label that is affixed to the lip on the
rear of the Node and each Expansion module.
